RMPflow

Riemannian Motion Policy (RMP) is a set of motion generation tools that underlies most Isaac Sim manipulator controls. It creates smooth trajectories for the robots with intelligent collision avoidance.

A Riemannian Motion Policy, or RMP, is an acceleration policy accompanied by a matrix \(M(q, \dot{q})\) that is sometimes called an inertia matrix, borrowing terminology from classical mechanics, but is also closely related to the concept of a Riemannian metric.

Leveraging the machinery of Riemannian geometry, RMPflow is a framework for combining RMPs representing multiple (possibly competing) objectives and constraints into a single global acceleration policy. Within this framework, the local RMPs may be defined on any number of intermediate task spaces (including the operational space of the end effector, generalizing operational space control). For details, see *RMPflow: A computational graph for automatic motion policy generation*.

Broadly defined, a motion policy is a mathematical function that takes the current state of a robot (e.g., position and velocity in generalized coordinates) and returns a quantity representing a desired change in that state. Such a policy may depend implicitly on variables representing one or more objectives or constraints, the state of the environment, etc. An acceleration policy is a motion policy where the output is desired acceleration, \(\ddot q = \pi(q, \dot{q})\), resulting in a second-order differential equation.

For the purpose of controlling a robot by position or velocity control, typically motion policies are used where the output is position or velocity. Such policies can be produced from an acceleration policy using a numerical integration scheme such as Euler integration.

The RMPflow Debugging Features section reviews functions belonging to RMPflow that are not part of the MotionPolicy interface. You can interact with RMPflow to control a robot that is already supported, there may be no need to read the other sections. If you are interested in the internal mechanics of RMPflow or want to configure RMPflow for an unsupported robot, continue reading the RMPflow documentation.

After reviewing the basics here, also see the RMPflow Tuning Guide for practical advice on configuring RMPflow for a new robot.

RMPflow Debugging Features

By directly interacting with an RmpFlow instance, the user may access features that are not available in other MotionPolicy implementations. It is common for developers to want to decouple a Motion Policy Algorithm from the simulated robot Articulation in Omniverse Isaac Sim. For example, When the simulated robot is moving sluggishly, it is important to determine whether the MotionPolicy or the PD gains have been improperly tuned, but this can be difficult when both the PD gains and the MotionPolicy both play a role in driving the robot joints. (see Outputs: Robot Joint Targets)

RMPflow provides visualization functions to clearly show the internal state of the algorithm as part of the stage. RMPflow uses collision spheres internally to avoid hitting obstacles in the world. These spheres can be visualized over time by calling RmpFlow.visualize_collision_spheres(). The visualization will stop when RmpFlow.stop_visualizing_collision_spheres() is called. The nominal end effector position can likewise be visualized with RmpFlow.visualize_end_effector_position() and RmpFlow.stop_visualizing_end_effector().

On their own, the visualization functions can be used to make sure that RMPflow’s internal representation of the robot is reasonable, but it does not help to decouple the simulated robot from the RmpFlow internal representation of the robot. On each frame when RmpFlow.compute_joint_targets(active_joint_positions,…) is called, the visualization is updated to use the active_joint_positions. This behavior can be turned off using RmpFlow.set_ignore_state_updates(True). When RmpFlow is “ignoring state updates”, it starts ignoring the active_joint_positions argument, and instead begins internally tracking the believed state of the robot by assuming that is completely independent of the physical simulation of the robot. When RmpFlow is set to ignore state updates from the simulator, and the visualization functions are used, it becomes simple to determine if an undesirable robot behavior comes from RmpFlow or from the robot Articulation and its PD gains.

RMPflow Configuration

Three files are necessary to configure RMPflow for use with a new robot:

1. A URDF (universal robot description file), used for specifying robot kinematics as well as joint and link names. Position limits for each joint are also required. Other properties in the URDF are ignored and may be omitted; these include masses, moments of inertia, visual and collision meshes, etc.

2. A supplementary robot description file in YAML format. In addition to enumerating the list of actuated joints that define the configuration space (c-space) for the robot, this file also includes sections for specifying the default c-space configuration as well as sets of collision spheres used for collision avoidance. This file may also be used to specify fixed positions for unactuated joints.

3. A RMPflow configuration file in YAML format, containing parameters for all enabled RMPs.

As a general mathematical framework, RMPflow does not prescribe the form that individual RMPs must take. The particular implementation of RMPflow in Lula (and by extension Omniverse Isaac Sim) does however expose a pre-specified set of RMPs that have been constructed and empirically found to produce smooth reactive behaviors for a variety of manipulation tasks. The remainder of this section summarizes the provided RMPs before concluding with some advice on parameter tuning.

C-Space Target RMP (c-space_target_rmp)

Purpose: Specifies a default c-space configuration for the robot, used for redundancy resolution.

Definition: Acceleration for this RMP is given by an equation similar to a PD controller, with a position gain and damping gain, but the magnitude of the position term is capped when the C-space distance exceeds a threshold. This cap avoids excessive forces when the configuration is far away from the target. Defining \(q\) to be the full configuration vector, we have

\[\ddot q = k_p r(q_0 - q) - k_d \dot q\,,\]

where the “robust capping function” \(r(p)\) is given by

\[\begin{split}r(p) = \left \{ \begin{array}{cl} p, & ||p|| < \theta \\ \theta\, p / ||p|| & \textrm{otherwise.} \end{array} \right.\end{split}\]

The inertia matrix is proportional to the identity:

\[M = \mu I\]

Finally, the c-space_target_rmp section of the RMPflow configuration file contains an additional inertia parameter \(m\). When this parameter is nonzero, it results in the introduction of a conceptually separate RMP corresponding to zero c-space acceleration, \(\ddot q = 0\), with inertia matrix given by \(M = mI\).

Parameters:

Units assume revolute joints where \(q\) is expressed in radians. If joints are instead prismatic, robust_position_term_thresh will have units of meters.

Name	Symbol	Units	Meaning
metric_scalar	\(\mu\)	-	Priority weight relative to other RMPs
position_gain	\(k_p\)	s-2	Position gain, determining how strongly configuration is pulled toward target
damping_gain	\(k_d\)	s-1	Damping gain, determining amount of “drag”
robust_position_term_thresh	\(\theta\)	rad	Distance in c-space at which the position correction vector is capped
inertia	\(m\)	-	Additional c-space inertia

Target RMP (target_rmp)

Purpose: Drives end effector toward specified position target.

Definition: Similar to the c-space target RMP, acceleration for this RMP resembles a PD controller, albeit with a slightly different strategy for capping the magnitude of the position correction vector.

\[\ddot x = k_p (x_0 - x) / (||x_0-x|| + \epsilon) - k_d \dot x\]

The inertia matrix blends between a rank-deficient metric \(S = n n^T`\), where \(n\) is the direction vector toward the target, and the identity \(I\). Intuitively, \(S\) cares only about the direction toward the target (letting other RMPs such as the obstacle avoidance RMP control the orthogonal directions), and \(I\) cares about all directions. The contribution of \(S\) is larger far from the goal, allowing obstacles to push the system more effectively, while \(I\) dominates near the goal, encouraging faster convergence. The blending is controlled by a radial basis function, specifically a Gaussian, that transitions from a minimum constant value far from the target to 1 near the target.

Near the target, an additional nonlinear “proximity boost” multiplier turns on. This factor again takes the form of a Gaussian. In summary,

\[M = \left[\beta(x) b + (1-\beta(x))\right] \left[\alpha(x) M_\textrm{near} + (1-\alpha(x)) M_\textrm{far} \right]\]

where

\[\begin{split}\begin{array}{l} \alpha(x) = (1-\alpha_\textrm{min})\exp \left(\frac{-||x_0-x||^2}{2 \sigma_a^2}\right) + \alpha_\textrm{min} \\ \beta(x) = \exp \left(-\frac{||x_0 - x||^2}{2 \sigma_b^2}\right) \\ M_\textrm{near} = \mu_\textrm{near} I \\ M_\textrm{far} = \mu_\textrm{far} S = \frac{\mu_\textrm{far}}{||x_0-x||^2} (x_0-x)(x_0-x)^T\,. \end{array}\end{split}\]

Parameters:

Name	Symbol	Units	Meaning
accel_p_gain	\(k_p\)	m/s2	Position gain
accel_d_gain	\(k_d\)	s-1	Damping gain
accel_norm_eps	\(\epsilon\)	m	Length scale controlling transition between constant acceleration region far from target and linear region near target
metric_alpha_length_scale	\(\sigma_a\)	m	Length scale of the Gaussian controlling blending between \(S\) and \(I\)
min_metric_alpha	\(\alpha_\textrm{min}\)	-	Controls the minimum contribution of the isotropic \(M_\textrm{near}\) term to the metric (inertia matrix)
max_metric_scalar	\(\mu_\textrm{near}\)	-	Metric scalar for the isotropic \(M_\textrm{near}\) contribution to the metric (inertia matrix)
min_metric_scalar	\(\mu_\textrm{far}\)	-	Metric scalar for the directional \(M_\textrm{far}\) contribution to the metric (inertia matrix)
proximity_metric_boost_scalar	\(b\)	-	Scale factor controlling the strength of boosting near the target
proximity_metric_boost_length_scale	\(\sigma_b\)	m	Length scale of the Gaussian controlling boosting near the target
xi_estimator_gate_std_dev	-	-	Unused parameter (to be removed in a future release)

Axis Target RMP (axis_target_rmp)

Purpose: Drives x-, y-, or z-axis of end effector frame toward target orientation. This RMP is used for general orientation targets (where an axis target RMP is added for each of the three axes) as well as for “partial pose” targets where only alignment of a single axis is desired.

Note

Partial pose targets are not currently supported by the Motion Generation extension.

Definition:

Similar to the (position) target RMP, the axis target RMP supports “proximity boosting,” but only when a target RMP is active at the same time. In this case, it’s the distance to the position target (\(||x_0-x||\)) that controls the strength of boosting.

The current and desired axis orientations are represented by unit vectors, denoted by \(n\) and \(n_0\) respectively. Acceleration is given by

\[\ddot n = k_p (n_0 - n) - k_d \dot n\,.\]

If a position target (i.e., target RMP) is active, the metric has the form

\[M_\textrm{boosted} = \left[\beta(x) b + (1-\beta(x))\right] \mu I\,,\]

where

\[\beta(x) = \exp \left(-\frac{||x_0 - x||^2}{2 \sigma_b^2}\right)\,.\]

When no position target is active, this simplifies to

\[M = \mu I\,.\]

Parameters:

Name	Symbol	Units	Meaning
accel_p_gain	\(k_p\)	s-2	Position gain
accel_d_gain	\(k_d\)	s-1	Damping gain
metric_scalar	\(\mu\)	-	Priority weight relative to other RMPs
proximity_metric_boost_scalar	\(b\)	-	Scale factor controlling the strength of boosting near the position target
proximity_metric_boost_length_scale	\(\sigma_b\)	m	Length scale of the Gaussian controlling boosting near the position target

Joint Limit RMP (joint_limit_rmp)

Purpose: Avoids joint limits.

Definition: This is a one-dimensional RMP that depends on a single c-space coordinate (joint) and a corresponding upper or lower joint limit as specified in the URDF for the robot. If a robot has \(N\) joints, it follows that a total of \(2N\) joint limit RMPs will be introduced. The joint limits specified in the URDF may be padded (i.e., made more conservative) by entering positive padding values in the joint_limit_buffers array in the RMPflow configuration file. For a given joint, the same padding value is used for both upper and lower limits.

The task space for this RMP consists of a shifted and scaled c-space coordinate, measuring the scaled distance to either the upper or lower joint limit. Without loss of generality, we consider a lower joint limit RMP. If \(q\) is the c-space coordinate for a given joint, and \(q_\textrm{upper}\) and \(q_\textrm{lower}\) are the upper and lower limits for that joint, respectively, we define

\[x = \frac{q - q_\textrm{lower}}{q_\textrm{upper} - q_\textrm{lower}}\,.\]

The acceleration for that coordinate is then given by

\[\ddot x = \frac{k_p}{x^2/\ell_p^2 + \epsilon_p} - k_d \dot x\,.\]

The metric (inertia matrix) is a scalar given by

\[m = \left(1 - \frac{1}{1+\exp(-\dot x/v_m)}\right) \frac{\mu}{x/\ell_m + \epsilon_m}\,.\]

Parameters:

Name	Symbol	Units	Meaning
metric_scalar	\(\mu\)	-	Overall priority weight relative to other RMPs
metric_length_scale	\(\ell_m\)	-	Length scale controlling ramp-up of metric as joint limit is approached
metric_exploder_eps	\(\epsilon_m\)	-	Offset determining \(x\) value at which metric diverges
metric_velocity_gate_length_scale	\(v_m\)	s-1	Scale determining rate at which metric increases with velocity in direction of barrier
accel_damper_gain	\(k_d\)	s-1	Damping gain
accel_potential_gain	\(k_p\)	s-2	Gain multiplying position barrier term
accel_potential_exploder_length_scale	\(\ell_p\)	-	Length scale controlling steepness of position barrier
accel_potential_exploder_eps	\(\epsilon_p\)	-	Offset limiting divergence of position barrier strength

Joint Velocity Limit RMP (joint_velocity_cap_rmp)

Purpose: Limits maximum joint velocity.

Definition: This RMP applies damping when the magnitude of the velocity of a given joint approaches the specified limit.

This is a one-dimensional RMP with acceleration given by

\[\ddot q = -k_d\,\textrm{sgn}(\dot q) \left(|\dot q| - (v_\textrm{max} - v_r)\right)\,.\]

The metric (inertia matrix) is a scalar given by

\[\begin{split}m = \left \{ \begin{array}{cl} 0, & |\dot q| < (v_\textrm{max} - v_r) \\ \frac{\mu}{1 - \left(|\dot q| - (v_\textrm{max} - v_r)\right)^2 / v_r^2} & \textrm{otherwise.} \end{array} \right.\end{split}\]

Note that the metric is zero outside the user-specified damping region, thereby disabling this RMP. In addition, clipping is applied to avoid divergence of the metric as \(\dot q\) approaches \(v_\textrm{max}\).

Parameters:

Units assume revolute joints where \(q\) is expressed in radians. If joints are instead prismatic, max_velocity and velocity_damping_region will have units of m/s.

Name	Symbol	Units	Meaning
max_velocity	\(v_\textrm{max}\)	rad/s	Maximum allowed velocity magnitude
velocity_damping_region	\(v_r\)	rad/s	Defines width of velocity region affect by damping
damping_gain	\(k_d\)	s-1	Damping gain
metric_weight	\(\mu\)	-	Overall priority weight relative to other RMPs

Collision Avoidance RMP (collision_rmp)

Purpose: Avoids collision with obstacles in the environment.

Definition: This is a one-dimensional RMP where the task space consists of a single coordinate measuring distance from a given collision sphere on the robot (specified in the robot description YAML file) to an obstacle in the environment. Denoting that coordinate as \(x\), the acceleration is given by

\[\ddot x = k_p \exp(-x / \ell_p) - k_d \left[1 - \frac{1}{1 + \exp(-\dot x/v_d)} \right] \frac{\dot x}{x/\ell_d + \epsilon_d}\,.\]

The metric (inertia matrix) is a scalar given by

\[m = \left[1 - \frac{1}{1 + \exp(-\dot x/v_d)} \right] g(x) \frac{\mu}{x / \ell_m + \epsilon_m}\,,\]

where \(g(x)\) is a piecewise polynomial that varies smoothly from 1 to 0 as \(x\) varies from 0 to \(r\),

\[\begin{split}g(x) = \left \{ \begin{array}{cl} x^2/r^2 -2s/r + 1, & x\le r \\ 0, & x\gt r \end{array} \right.\end{split}\]

Parameters:

Name	Symbol	Units	Meaning
damping_gain	\(k_d\)	s-1	Damping gain
damping_std_dev	\(\ell_d\)	m	Length scale controlling increase in acceleration as obstacle is approached
damping_robustness_eps	\(\epsilon_d\)	-	Offset determining \(x\) value at which acceleration diverges (before clipping)
damping_velocity_gate_length_scale	\(v_d\)	m/s	Scale determining velocity dependence of “velocity gating” function
repulsion_gain	\(k_p\)	m/s2	Gain for position repulsion term
repulsion_std_dev	\(\ell_p\)	m	Length scale controlling distance dependence of repulsion
metric_modulation_radius	\(r\)	m	Length scale determining distance from obstacle at which RMP is disabled completely
metric_scalar	\(\mu\)	-	Overall priority weight relative to other RMPs
metric_exploder_std_dev	\(\ell_m\)	m	Length scale controlling increase in metric as obstacle is approached
metric_exploder_eps	\(\epsilon_m\)	-	Offset determining \(x\) value at which metric diverges (before clipping)

Damping RMP (damping_rmp)

Purpose: Contributes additional nonlinear damping based on control frame (e.g., end effector) velocity relative to target.

Definition: This is a one-dimensional RMP where the task space consists of a single coordinate \(x\) measuring distance from the origin of the control frame to the target. The acceleration is given by

\[\ddot x = -k_d |\dot x|\dot x\]

and the metric by

\[M = \mu |\dot x| I\,.\]

Finally, the damping_rmp section of the RMPflow configuration file contains an additional inertia parameter \(m\). When this parameter is nonzero, it results in the introduction of a conceptually separate RMP corresponding to zero acceleration, \(\ddot x = 0\), with inertia matrix given by \(M = mI\).

Parameters:

Name	Symbol	Units	Meaning
accel_d_gain	\(k_d\)	m-1	Nonlinear damping gain
metric_scalar	\(\mu\)	(m/s)-1	Priority weight relative to other RMPs
inertia	\(m\)	-	Additional inertia

Further Reading

See the RMPflow Tuning Guide for practical advice on configuring RMPflow for a new robot.